Reset the Epson RX610 waste ink pad counter
The RX610 (Epson Stylus Photo RX610) can be reset in software. VNIT Reset Tool reads its counters for free over a USB cable, runs one free trial reset, and resets to 0% with a US$6 key.
Windows or Mac · reading the counter is free · one free trial per printer
We'll email you the download link, so you can open it on your Windows PC or Mac later. Reading the counter is free.
Sent. Open the email on your computer.
Too many requests. Please try again in a few minutes.
That does not look like an email address.
We could not send the email just now. Please try again later.
On Windows, install the RX610 with Epson's driver, not Microsoft's. Download it from Epson's website for this model. If Windows set the printer up by itself with a Microsoft driver (Windows Ready Print or Microsoft IPP Class Driver), it may still print, but the tool often can't read or reset it over USB. How to get the Epson driver back.
How the RX610 tells you
When its waste ink counter is full, the RX610 stops printing. On the computer you will usually see “The printer's ink pads are at the end of their service life” or “Service Required”; on the printer itself, error lights or a message on its screen. Nothing is broken: a counter has reached its limit.
Use a USB cable for the RX610
Reading and resetting over Wi-Fi works on a few models only. Connect it with a USB cable. If the tool finds the printer on Wi-Fi but cannot read the counter, the tool is not broken: plug in the cable and press Check Printer again.
Reset the RX610 on a Mac
The same app runs natively on macOS 11 or newer, on Intel Macs and Apple silicon (M1 and later), so you do not need Windows, Boot Camp or a virtual machine. Connect the RX610 with a USB cable (MacBooks with only USB-C ports need an adapter). The first time, macOS asks you to confirm in System Settings → Privacy & Security → Open Anyway. Mac guide with screenshots · Which Epson reset tools run on a Mac.
Looking for the Epson RX610 Adjustment Program?
The Epson Adjustment Program for the RX610 is Epson's service software for repair technicians: one program per model, Windows only, with many functions besides the counter (EEPROM settings, head ID, alignment). Copies passed around online come from unknown sources and may be for the wrong model or region. If the RX610 stops with the ink pad error, you only need its waste ink counter set back. VNIT Reset Tool does that one job, on Windows and Mac, and reading the counter is free. What the Adjustment Program is · How to spot an unsafe download.
How to reset the Epson RX610 ink pad counter
- 01Download VNIT Reset Tool and unzip itWindows 7–11 or macOS 11+. Unzip it first: running it from inside the zip causes errors. Screenshots of every step: on Windows · on a Mac.
- 02Connect the RX610 and press Check PrinterPlug in the USB cable. Wi-Fi works on a few models only, so use the cable. Switch the printer on. The tool shows the model, serial and each counter. The computer needs internet.
- 03Run the free trial, or enter your keyThe trial drops a 90%+ counter to 80%. A US$6 reset key takes it to 0%.
- 04Switch the printer off and on againSkip this and the printer still shows the old error.
After the reset: deal with the pads
The reset changes the counter, not the pads. If the RX610 has printed a lot, wash or replace the pads, or fit an external waste ink tank, so ink cannot overflow. How.
RX610 questions
Is this the Epson RX610 Adjustment Program?
No. The Adjustment Program is Epson's Windows service software for technicians, one per model, with many service functions. VNIT Reset Tool only reads and resets the RX610's waste ink counters, on Windows and Mac, which is all the ink pad error needs.
The free trial worked. Do I still need a key?
Not straight away. The trial leaves the counter at 80%, so the error comes back sooner than after a full reset to 0% with a key.
Same reset family as the RX610
These models share the RX610's counters and reset the same way.