Reset the Epson L3110 waste ink pad counter
The L3110 can be reset in software. VNIT Reset Tool reads its counters for free over a USB cable, runs one free trial reset, and resets to 0% with a US$6 key.
Windows or Mac · reading the counter is free · one free trial per printer
We'll email you the download link, so you can open it on your Windows PC or Mac later. Reading the counter is free.
Sent. Open the email on your computer.
Too many requests. Please try again in a few minutes.
That does not look like an email address.
We could not send the email just now. Please try again later.
On Windows, install the L3110 with Epson's driver, not Microsoft's. Download it from Epson's website for this model. If Windows set the printer up by itself with a Microsoft driver (Windows Ready Print or Microsoft IPP Class Driver), it may still print, but the tool often can't read or reset it over USB. How to get the Epson driver back.
Where the L3110 has been reset
91 L3110 printers have been reset with VNIT Reset Tool between 24 August 2026 and 1 November 2026, in 35 countries. Counted by printer serial from the reports the app sends after a reset; we publish no serial numbers or personal data.
Countries, most first: the Philippines, Indonesia, India, Brazil, Chile, Argentina, Vietnam, Bolivia, Afghanistan, Colombia, Ethiopia, Malaysia and 23 more.
Connection used: USB cable · computers: Windows and Mac.
Waste ink counters on the L3110
VNIT Reset Tool reads and resets these counters on the L3110. The printer stops when a counter reaches its limit.
| Counter | What it is | Limit |
|---|---|---|
| Main pad | The main absorber pad inside the printer body | 6,346 points |
| Platen pad | The pad near the paper path, used by borderless printing | 3,416 points |
The tool shows each counter as a percentage of its limit. 100% means full.
How the L3110 tells you
The L3110 has no screen and no Wi-Fi. When a waste ink pad counter is full, its power and paper lights flash at the same time and printing stops. That is a different pattern from the newer L3210, so check the table below. Connect the L3110 with a USB cable to read and reset the counter.
What the L3110 lights mean
Not every blinking light is the ink pads. Only the rows marked “Yes” are fixed by resetting the counter.
| Lights | What Epson says it means | Fixed by a reset? |
|---|---|---|
| Power and paper lights flash at the same time | An ink pad is nearing or at the end of its service life | Yes |
| Power and paper lights flash one after the other (alternately) | The borderless printing ink pad is nearing or at the end of its service life | Yes |
| Paper light flashes (on its own) | Paper is jammed in the printer | No |
| Paper light on | No paper, or several sheets fed at once | No |
| All lights flash | Paper or protective material is stuck inside. Open the front cover and remove it | No |
| Power light flashes | The printer is busy. Wait | No |
Source: Epson L3110 User's Guide: product light status. Reading the counter for free tells you which counter is full.
Use a USB cable for the L3110
Reading and resetting over Wi-Fi works on a few models only. Connect it with a USB cable. If the tool finds the printer on Wi-Fi but cannot read the counter, the tool is not broken: plug in the cable and press Check Printer again.
Reset the L3110 on a Mac
The same app runs natively on macOS 11 or newer, on Intel Macs and Apple silicon (M1 and later), so you do not need Windows, Boot Camp or a virtual machine. Connect the L3110 with a USB cable (MacBooks with only USB-C ports need an adapter). The first time, macOS asks you to confirm in System Settings → Privacy & Security → Open Anyway. Mac guide with screenshots · Which Epson reset tools run on a Mac.
Measured, not assumed: by 1 November 2026, the reset reports our app sends back show the L3110 reset over USB on 8 different Macs.
Looking for the Epson L3110 Adjustment Program?
The Epson Adjustment Program for the L3110 is Epson's service software for repair technicians: one program per model, Windows only, with many functions besides the counter (EEPROM settings, head ID, alignment). Copies passed around online come from unknown sources and may be for the wrong model or region. If the L3110 stops with the ink pad error, you only need its waste ink counters set back (Main pad, Platen pad). VNIT Reset Tool does that one job, on Windows and Mac, and reading the counter is free. What the Adjustment Program is · How to spot an unsafe download.
Epson L3110 reset key
A reset key is the code that takes the L3110's waste ink counters to 0% in VNIT Reset Tool. It costs US$6, arrives by email in about a minute and does not expire. One key is one full reset on one printer, and it is used only when the reset has been written. Try the free check and the free trial first, so you know the tool can reach your L3110 before you pay. Keys for other tools, such as WIC Reset Utility, do not work here. Buy a key · How reset keys work.
How to reset the Epson L3110 ink pad counter
- 01Download VNIT Reset Tool and unzip itWindows 7–11 or macOS 11+. Unzip it first: running it from inside the zip causes errors. Screenshots of every step: on Windows · on a Mac.
- 02Connect the L3110 and press Check PrinterPlug in the USB cable. Wi-Fi works on a few models only, so use the cable. Switch the printer on. The tool shows the model, serial and each counter. The computer needs internet.
- 03Run the free trial, or enter your keyThe trial drops a 90%+ counter to 80%. A US$6 reset key takes it to 0%.
- 04Switch the printer off and on againSkip this and the printer still shows the old error.
Video: reset the L3110 step by step
48 seconds, no sound. Recorded in the tool's demo mode for the L3110: the example key and serial number are not real. Connect your printer with a USB cable.
What you will see
Screens from the tool's demo mode for the L3110. The serial number and counter values on your printer will be different.
After the reset: deal with the pads
The reset changes the counter, not the pads. If the L3110 has printed a lot, wash or replace the pads, or fit an external waste ink tank, so ink cannot overflow. How.
L3110 questions
Why is my Epson L3110 red light blinking?
Look at which lights flash. Power and paper flashing together, or one after the other, point to the ink pads, which this tool resets. The paper light alone means a paper jam, and all lights flashing means something is stuck inside. Reading the counter for free tells you for sure.
It is the power and paper lights, not the ink light. Is it still the ink pads?
Yes. On the L3110 and L3150, Epson uses the power and paper lights for the ink pads: flashing together for the main pad, one after the other for the borderless pad. This is different from the L3210, which uses the ink and paper lights.
Which counters does it have?
Two: the Main pad and the Platen pad (used by borderless printing). The tool shows each one as a percentage, and Reset all clears them in one go.
Is the L3110 reset the same as the L3150?
Yes. The L3150 is the Wi-Fi model of the same family, with the same two counters. The tool resets both the same way over a USB cable.
Is this the Epson L3110 Adjustment Program?
No. The Adjustment Program is Epson's Windows service software for technicians, one per model, with many service functions. VNIT Reset Tool only reads and resets the L3110's waste ink counters, on Windows and Mac, which is all the ink pad error needs.
The free trial worked. Do I still need a key?
Not straight away. The trial leaves the counter at 80%, so the error comes back sooner than after a full reset to 0% with a key.
My Epson L3110 stopped printing. Is it the ink pads?
It can be. When a waste ink counter reaches its limit, the printer stops printing until the counter is reset. Press Check Printer in VNIT Reset Tool to read the counter for free: if it is at or near 100%, that is the cause. If the counters are low, look elsewhere, such as the driver, the print queue or the print head.
Is this the same as "reset ink levels" or a factory reset on the L3110?
No. Resetting ink levels is about the ink tanks, and a factory reset puts settings such as the network back to default. Neither clears the waste ink counter. This page is about the waste ink counter only.
Same reset family as the L3110
These models share the L3110's counters and reset the same way (58 models).
Also in this family: ET-2721, ET-2722, ET-2723, ET-2724, ET-2725, ET-2726, ET-2728, ET-4700, L1118, L1119, L3100, L3101, L3104, L3105, L3106, L3107, L3108, L3109, L3111, L3114, L3115, L3116, L3117, L3118, L3119, L3150, L3151, L3152, L3153, L3156, L3158, L3160, L3161, L3163, L3165, L3166, L3168, L5190, L5196, L5198. All supported printers.