Epson T6715 maintenance box
28 Epson printers in our list keep waste ink in the T6715 maintenance box instead of fixed ink pads. When the box is full the printer stops and asks you to replace it. Reset software cannot clear this: fit a new box, or reset the box’s chip with a chip resetter.
We may earn a commission when you buy through these links, at no extra cost to you.
Printers that use the T6715
Epson EC-4020Epson EC-4030Epson WF-3820Epson WF-3823Epson WF-3824Epson WF-3825Epson WF-4720Epson WF-4723Epson WF-4724Epson WF-4725Epson WF-4730Epson WF-4733Epson WF-4734Epson WF-4735Epson WF-4740Epson WF-4743Epson WF-4744Epson WF-4745Epson WF-4820Epson WF-4823Epson WF-4824Epson WF-4825Epson WF-4830Epson WF-4833Epson WF-4834Epson WF-4835Epson WF-C4310Epson WF-C4810
Check the code printed on your old box before you buy a new one. Regional versions of a printer can use a different box.
What the message means
The printer counts how much waste ink goes into the box, and the count is kept on the box’s chip. When it reaches the limit, the printer says the maintenance box is at (or near) the end of its service life and stops printing. A new box starts again from empty, which is why the message clears.
Replace the box or reset the chip?
- New box: the clean fix. The old box really is full of ink. Replacing it takes a few minutes; follow the steps in your printer's user's guide.
- Chip resetter: a small device that resets the count on the box's chip, so you can keep using the same box for a while. It does not remove any ink, so only do it if the box still has room.
- Reset software (including VNIT Reset Tool) cannot help with maintenance box printers. It is for printers with fixed ink pads.
Printer not in this list?
Look it up in the supported printers list. Many Epson printers use fixed ink pads, and those can be reset in software.