Epson EW-M630T: replace the maintenance box or reset its chip

The EW-M630T collects waste ink in a replaceable maintenance box with a chip (EWMB2). When the box is full, the fix is a new box, or a chip resetter (a small tool that resets the box’s chip). No PC reset software, ours included, applies to this model.

How the EW-M630T tells you

When its maintenance box is full, the EW-M630T stops printing and asks you to replace the maintenance box. The count is kept on the box's chip, which is why a new box clears the message.

What to do

1. Check the code printed on the box in your printer. It should read EWMB2.
2. Buy a replacement EWMB2 box. Genuine Epson boxes and compatible boxes with a new chip are both sold.
3. Swap the box following your printer's manual. The printer reads the new chip and the message clears.

Or reset the box’s chip

A chip resetter for EWMB2 is a small tool you touch to the chip on the box; it sets the box’s count back to empty so the printer accepts it again. It is a hardware tool, not software. It does not empty the box: only reuse a box whose absorbent pad is not soaked, or you risk ink leaking inside the printer.

We may earn a commission when you buy through this link, at no extra cost to you.

All printers that use the EWMB2 maintenance box.

Not sure this is your printer's problem? Send us a photo of the screen on WhatsApp and we will tell you for free.

EW-M630T questions