Epson T6711 maintenance box
34 Epson printers in our list keep waste ink in the T6711 maintenance box instead of fixed ink pads. When the box is full the printer stops and asks you to replace it. Reset software cannot clear this: fit a new box, or reset the box’s chip with a chip resetter.
We may earn a commission when you buy through these links, at no extra cost to you.
Printers that use the T6711
Epson L1455Epson WF-3010Epson WF-3011Epson WF-3012Epson WF-3520Epson WF-3521Epson WF-3522Epson WF-3530Epson WF-3531Epson WF-3540Epson WF-3541Epson WF-3542Epson WF-3620Epson WF-3621Epson WF-3622Epson WF-3640Epson WF-3641Epson WF-3642Epson WF-7110Epson WF-7111Epson WF-7115Epson WF-7210Epson WF-7211Epson WF-7215Epson WF-7610Epson WF-7611Epson WF-7615Epson WF-7620Epson WF-7621Epson WF-7625Epson WF-7710Epson WF-7715Epson WF-7720Epson WF-7725
Check the code printed on your old box before you buy a new one. Regional versions of a printer can use a different box.
What the message means
The printer counts how much waste ink goes into the box, and the count is kept on the box’s chip. When it reaches the limit, the printer says the maintenance box is at (or near) the end of its service life and stops printing. A new box starts again from empty, which is why the message clears.
Replace the box or reset the chip?
- New box: the clean fix. The old box really is full of ink. Replacing it takes a few minutes; follow the steps in your printer's user's guide.
- Chip resetter: a small device that resets the count on the box's chip, so you can keep using the same box for a while. It does not remove any ink, so only do it if the box still has room.
- Reset software (including VNIT Reset Tool) cannot help with maintenance box printers. It is for printers with fixed ink pads.
Printer not in this list?
Look it up in the supported printers list. Many Epson printers use fixed ink pads, and those can be reset in software.