Epson T6710 maintenance box
32 Epson printers in our list keep waste ink in the T6710 maintenance box instead of fixed ink pads. When the box is full the printer stops and asks you to replace it. Reset software cannot clear this: fit a new box, or reset the box’s chip with a chip resetter.
We may earn a commission when you buy through these links, at no extra cost to you.
Printers that use the T6710
Epson WP-4010Epson WP-4011Epson WP-4015Epson WP-4020Epson WP-4022Epson WP-4023Epson WP-4025Epson WP-4090Epson WP-4091Epson WP-4092Epson WP-4095Epson WP-4511Epson WP-4515Epson WP-4520Epson WP-4521Epson WP-4525Epson WP-4530Epson WP-4531Epson WP-4532Epson WP-4533Epson WP-4535Epson WP-4540Epson WP-4545Epson WP-4590Epson WP-4592Epson WP-4595Epson WP-M4011Epson WP-M4015Epson WP-M4095Epson WP-M4521Epson WP-M4525Epson WP-M4595
Check the code printed on your old box before you buy a new one. Regional versions of a printer can use a different box.
What the message means
The printer counts how much waste ink goes into the box, and the count is kept on the box’s chip. When it reaches the limit, the printer says the maintenance box is at (or near) the end of its service life and stops printing. A new box starts again from empty, which is why the message clears.
Replace the box or reset the chip?
- New box: the clean fix. The old box really is full of ink. Replacing it takes a few minutes; follow the steps in your printer's user's guide.
- Chip resetter: a small device that resets the count on the box's chip, so you can keep using the same box for a while. It does not remove any ink, so only do it if the box still has room.
- Reset software (including VNIT Reset Tool) cannot help with maintenance box printers. It is for printers with fixed ink pads.
Printer not in this list?
Look it up in the supported printers list. Many Epson printers use fixed ink pads, and those can be reset in software.